Influence of Toothbrushing Methods on Tightening Torque with Healing Abutments of Different Lengths: An in Vitro Study

Abstract

Statement of problem: Early tightening torque at the implant-healing abutment interface is a recognized concern in implant treatment. However, little is known regarding the effects of toothbrushing methods on the interface established between the implant and healing abutments of different heights. Purpose: The purpose of this in vitro study was to evaluate the effect of different toothbrushing methods on tightening torque for healing abutments of different heights. Material and methods: A total of 60 implants (Bilimplant; Proimtech) were embedded in epoxy resin blocks. The following 6 test groups were established: healing abutments with manual toothbrush group (Oral B Pro Expert All in one; Oral B) and 4 mm height (MTB-4, (which served as the control); 6 mm height (MTB-6, which served as the control); sonic toothbrush group (Philips Sonicare 3100 Series; Philips Oral Healthcare) and 4 mm height (S-4); 6 mm height (S-6); oscillating/rotating toothbrush group (Oral B Smart 6 6000N; Oral B) and 4 mm height (OR-4) and 6 mm height (OR-6). Each specimen was tightened to 15 Ncm and brushed. The digital torque meter (Cap Torque Tester Series TT01; Mark10) was used to calculate the reverse torque values. Results: The highest torque loss value in the average torque losses in the test groups was 1.3 (OR-6); the lowest was 0.3 (S-4). While a significant difference was found between groups S-4 and S-6 (P=.018), no statistically significant difference was found among the other groups (P>.05). Conclusions: Torque loss was greater in the healing abutment with a height of 6 mm and with the oscillatory and rotational brushing method.