Publication:
Experimental and Numerical Study of Process Limits for Deep Drawing of Dome-Structured Sheet Metals

Simple item page
dc.authorscopusid57194335915
dc.authorscopusid6507739109
dc.contributor.authorDengiz, C.G.
dc.contributor.authorYildizli, K.
dc.date.accessioned2020-06-21T13:18:10Z
dc.date.available2020-06-21T13:18:10Z
dc.date.issued2017
dc.departmentOndokuz Mayıs Üniversitesien_US
dc.department-temp[Dengiz] Cengiz Görkem, Department of Mechanical Engineering, Ondokuz Mayis Üniversitesi, Samsun, Turkey; [Yildizli] Kemal, Department of Mechanical Engineering, Ondokuz Mayis Üniversitesi, Samsun, Turkeyen_US
dc.description.abstractThe demand for lightweight materials is increasing due to energy saving in the sheet metal forming industry. Structured sheet metals are a strong yet lightweight material. But the process limits for deep drawing of structured sheet metals should be investigated for the forming process. In this study, the stiffness properties and the process limits of dome-structured duplex stainless steel (DSS) were determined experimentally by three-point bending test and Erichsen test, respectively. Also, the Erichsen test was simulated using ABAQUS. Firstly, the forming limit diagram (FLD) of DSS was determined. After that, the dome structures, which had diameters of 3, 6, and 9 mm, were stamped on planar DSS sheet metal. The bending test results showed that the bending strength of 6- and 9-mm dome-structured sheet metal was two times higher than planar and 3-mm dome-structured sheet metal. After the dome stamping process, the 3- and 6-mm dome-structured sheet metal still had a process safety margin of 58 and 47%, respectively, for uniaxial tension in the FLD. On the other hand, the 9-mm dome-structured sheet metal had a process safety margin of 57% for biaxial tension in the FLD. © 2017, Springer-Verlag London.en_US
dc.identifier.doi10.1007/s00170-017-0450-7
dc.identifier.endpage4472en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.scopus2-s2.0-85019663277
dc.identifier.scopusqualityQ2
dc.identifier.startpage4457en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-017-0450-7
dc.identifier.volume92en_US
dc.identifier.wosWOS:000411237500110
dc.identifier.wosqualityQ2
dc.language.isoenen_US
dc.publisherSpringer Londonen_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.journalInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDeep Drawingen_US
dc.subjectDome Structureen_US
dc.subjectDuplex Stainless Steelen_US
dc.subjectErichsen Testen_US
dc.subjectStructured Sheet Metalen_US
dc.titleExperimental and Numerical Study of Process Limits for Deep Drawing of Dome-Structured Sheet Metalsen_US
dc.typeArticleen_US
dspace.entity.typePublication

Files

Collections

Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu