Basit öğe kaydını göster

dc.contributor.authorKoç, Varol
dc.date.accessioned2020-06-21T10:30:20Z
dc.date.available2020-06-21T10:30:20Z
dc.date.issued2007
dc.identifier.issn1300-7009
dc.identifier.urihttps://app.trdizin.gov.tr/publication/paper/detail/Tmpjek16SXk=
dc.identifier.urihttps://hdl.handle.net/20.500.12712/7932
dc.description.abstractBu çalışmanın amacı beton malzeme göçmesinde dağılı çatlakların doğurduğu boyut etkisinin gösterilmesi ve uygulanan yükleme durumu ve eleman geometrisine bağlı olarak, normal betonda boyut etkisi parametrelerinin belirlenmesi, logaritmik eksen takımlı boyut etkisi eğrisinin çizilerek malzeme davranışının lineer elastik kırılma mekaniği (LEKM) ile dayanım kriteri sınırları arasındaki yerinin bulunmasıdır. Bu amaçla normal dayanımlı betondan hazırlanan iki ayrı seri çift konsol elemanlara, konsol eksenlerine paralel basınç yüklemesi uygulanmıştır. Yüklemeler iki farklı dışmerkezlikte uygulanarak birbirleriyle karşılaştırılmış, dışmerkezliğin malzeme gevrekliğine etkisi incelenmiştir. Her bir seri ve dışmerkezliğe ait sonuçlar boyut etkisi eğrileri şeklinde düzenlenmiş ve boyut etkisi parametreleri elde edilmiştir. Sonuç olarak dışmerkezliğin küçülmesinin, elemanı basınç/kesme göçmesi moduna yaklaştırdığı ve davranışın, belirgin olarak LEKM’ne yönelerek, gevrekleştiği görülmüştür.en_US
dc.description.abstractThe aim of this study is to demonstrate the size effect which is resulted from the distributed cracks causing the collapse of concrete material. For this purpose, it is determined the size effect parameters for normal strength concrete depending on applied load state and element geometry and bilogarithmic plots of size effect relating to material behavior, which are assigned by the border between the linear elastic fracture mechanic (LEFM) and strength criteria. For this purpose two series normal strength concrete double cantilever beams are applied the compressive loads parallel to the cantilever axes. The loads are applied at two different eccentricity and compared with each other. In addition, the eccentricity of material brittle effect is investigated. The results for each series and eccentricities are prepared as the size effect curves and the size effect parameters are found. It is seen that, the elements approach the compression/shear failure mode while the eccentricities are small, and the behavior of elements become brittle.en_US
dc.language.isoturen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleDışmerkezlik değişimi altında beton boyut etkisien_US
dc.title.alternativeConcrete size effect under the changed eccentiricityen_US
dc.typeotheren_US
dc.contributor.departmentOMÜen_US
dc.identifier.volume13en_US
dc.identifier.issue2en_US
dc.identifier.startpage181en_US
dc.identifier.endpage187en_US
dc.relation.journalMühendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryDiğeren_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster